Jam your little one with these fun DIY musical instruments

[ad_1]

Did you know that playing a musical instrument helps kids enjoy it on almost every level? It improves their cognitive skills while promoting creative thinking and their ability to concentrate. Today we are talking about homemade musical instruments! Here are five simple DIY musical instruments your child will love to make and play! Each is simple and safe to make, using everyday items you can find around the house.

Guitar tissue box

It is a perfect starter instrument for your budding musician.

You will need

  • Empty tissue box with top opening
  • Craft painting
  • Brushes or sponge brushes
  • Foam stickers
  • Elastic bands of different widths

Method

  1. Paint the box and let it dry.
  2. Decorate the tissue box using stickers.
  3. Slip the rubber bands onto the tissue box over the opening. Do this one group at a time.

Tambourine cardboard plate

Have fun painting and decorating. The bells make a lovely sound when the tambourine is shaken or tapped.

You will need

  • Paper plate
  • To paint
  • Brush or foam brush
  • Pencil
  • Punch
  • Thin ribbon
  • Bells
  • Cotton balls
  • Glue
  • Clothespins
  • Stickers

Method

  1. Paint the underside of the plate.
  2. Once the paint is dry, fold your cardboard plate in half and use a pencil to mark where you want to punch holes.
  3. Check that both sides of the plate are aligned and punch your pencil marks.
  4. Cut pieces of ribbon, thread the bells, then tie them through the holes. The bells should be slightly loose to ring.
  5. Fill the inside with cotton balls to make the tambourine soft, plump, and easy to hold.
  6. Glue the edges of the baking sheet together and use clothespins to hold them in place until they are dry.

Shake

Turn up the music and make the kids dance and tremble to the beat.

You will need

  • 2 plastic bottles of 250 ml, labels removed
  • Rice, beans, pearls or popcorn seeds
  • 2 tubes of toilet paper
  • Scissors
  • Electrical tape
  • Ribbon

Method

  1. Pour 2cm of the load of your choice into the bottle.
  2. Put the lid on and listen to the sound it makes. If you are happy with the sound, go to the next step. Otherwise, add or remove infill.
  3. Fill each shaker with different toppings to achieve different sounds before tightening the bottle caps.
  4. To create the handles, cut two rolls of toilet paper from end to end. Tighten the roll around the bottle cap and wrap it with electrical tape, starting with the end of the bottle. Make sure the ribbon is on the bottle and tube and go down. Make sure to cover all of the cardboard to create a strong grip.

To the rhythm of the drums

Everyone loves the drums and the best part is that they don’t make a lot of noise.

You will need

  • Boxes, cleaned with label removed (make sure there are no sharp edges)
  • To paint
  • Brushes or sponge brushes
  • Balloons
  • Scissors
  • Elastics or ribbon
  • Chopsticks

Method

  1. Paint and decorate your boxes.
  2. Cut the open end of a balloon and leave the bulb intact.
  3. Stretch the bulb over the top of a box and use a rubber band or ribbon to secure it.
  4. Use chopsticks, crayons, your fingers, or your baby’s hands to drum.

Rattle & roller with castanets

Simple objects like these can be used to make music. It will also help strengthen your little one’s fingers.

You will need

  • Thick cardboard
  • Scissors
  • Bottle caps
  • Craft painting
  • Brush or foam brush
  • Craft glue
  • Clothespins

Method

  1. Cut two strips of cardboard approximately 13cm x 4cm. Decorate as you like or you can decorate when finished.
  2. Fold the cardboard strips in half.
  3. Place glue on the jagged edge of the bottle cap and glue inside the folded cardboard. If the cardboard is very thick, you can push the bottle cap into the cardboard for a better grip.
  4. Use a dowel to hold the cap in place until it is dry.
  5. Glue the second bottle cap to the other end of the cardboard strip, making sure it is aligned with the first bottle cap. They should click together when you’re done.
  6. Let the glue dry.
  7. Decorate them if you haven’t already.
  8. Now is the time to have lots of fun clicking.

[ad_2]
Source link

Comments are closed.